Other Support Sub-Menu:
Aurora / Power one Wind Inverter and Controller Manuals
On this page you will find links to most of the documentation you will need for our legacy wind inverters and controllers, many of which are now discontinued. You will find documentation for our current product range on the page for that product. Please scroll down to the document you require and click on the link.
You will also find data sheets, manuals and certificates on the ABB website here
Wind Inverter Data Sheets
Aurora UNO Inverters, Click HERE
Aurora 3Kw to 4.2Kw Inverters, Click HERE
Aurora 6Kw Inverters, Click HERE
Aurora 12.5kw 3 Phase Wind Inverter, Click HERE
Aurora 20Kw and 27Kw Trio Inverters Click HERE
Wind Interface Data Sheets
Aurora Wind Interface 20A, Click HERE
Aurora 15kw & 25Kw Wind Interface, Click HERE
Wind Inverter Manuals
Aurora 2.0 & 2.5 UNO Wind Inverter Manual. Click HERE
Aurora 3.6kw Inverter Manual Click HERE
Aurora 6kw Inverter Manual Click here
Aurora Trio Inverter Manual Click here
Our inverters come pre-configured with a range of grid standards for different regions. For instructions on setting up the contry code, please click here
Ground Leakage DetectionThe 3.6kw to 6kw wind inverters have built in ground leak detection. Should the inverter report an iLeak or RISO error, instructions on how to diagnose the problem with the turbine can be found by clicking HERE
Wind Interface Manuals
Aurora 15kw & 25Kw Wind Interface Manual, Click here
(for the 15kw & 25kw Wind Interface, we usually assist on a first installation and then develop custom documentation for each turbine type)
Aurora 20A Wind Interface Manual Click here
Changing voltage settings on wind interface – It is possible to change the voltages at which the dump load is applied with this interface. These changes should only be done in consultation with us, but the instruction manual on how to do this can be found by clicking HERE.
Software Manuals –
Please find software on our SOFTWARE page (click here). The manuals for this software are below;
Aurora Installer, V3.1.4 is used for configuring inverters from 3 to 6kw in size. You can download the manual for this software by clicking HERE
We also have produced a guide to setting up power curves on your inverter using this software. This can be downloaded by clicking HERE
The UNO range of inverters are programmed using Aurora Manager LITE Software. The inverter installation manual provides instructions on using this software.