The Power One 20A Wind Interface is suitable for turbines typically up to 6kw (depending on working voltage). This device is an economical solution which provides the following functionality.
- Rectifies wild AC from turbine into DC
- Provides capacitors for smoothing the DC to make it “inverter ready”
- Fast switching for dump load resistors to manage over-speed in gusts with configurable voltage settings
- Provides a frequency output to the inverter so that the power curve used can be based on RPM rather than voltage if desired.
For further information on this interface, please find the data sheet by clicking HERE.
There is also an installation manual available by clicking HERE